베스파 스몰바디에 디스크 브레이크를 달기 위한 SIP에 대한 질의

HI.

First of all, thank you for the reply.

but the mail you sent to me wasn't that helpful.

so I'm going to explain more details with pictures attached.

I bought Art.Nr. 13337000, Art.Nr. 30015000 and Art.Nr.65023000 to put these items on my ET3 in your online shop

Last time, when I emailed you about some questions about these items

you guys said to me that it would be better if I have a shortened Art.Nr. 13337000 rather than PK Fork to protect the ET3 

However, I found a couple of problems when I just put the items together.

look at the first picture

firstly, the pk shock which I ordered is so long that the angle of suspension arm became too wide.

so, in this case, do I make the pk shock I ordered shorten by myself?

look at the 2nd picture

The length of the fork is too short.

also, when I install the master cylinder, suspension arm is disturbed due to the short Fork.

look at the next picture. 

2-2.

the red circle in the picture is where there is a problem

 

Furthermore, I think there is a potential problem with the fender due to the short fork.

 

I don't think I'm satisfied with this purchase especially if I have to cut the fender by myself.

 

Therefore, if I have to figure out all these problems by myself, I want to get refund of Art.Nr. 13337000 or exchange Art.Nr. 13337000 to Art.Nr. 13333000